Why Standing Seam

When you want the best metal roof system available — period.

Zero Exposed Fasteners

All clips are concealed under the seam. No screws to back out, no gaskets to crack, no maintenance schedule. Set it and forget it.

Kynar 500 Finish

PVDF/Kynar 500 coatings are color-stable for 30+ years. Comes with a real lifetime paint warranty — not a 5-year 'limited' warranty.

Cold-Climate Specialty

Smooth seamed surface sheds snow before ice dams can form. Optional snow retention bars hold larger loads where needed for safety.

160 MPH Wind Rating

Continuous mechanical seams and concealed clips create a uniform monolithic surface — far stronger than overlapping shingles.

Architectural Versatility

From traditional Cape Cod to ultra-modern. Available in 12-30+ colors including custom matched. Multiple panel widths and rib profiles.

Cool Roof Technology

Energy Star qualified colors reflect 30-90% of solar energy. Real summer cooling savings of 15-25% over asphalt shingles.

Our Process

From Quote to Completion

01

Custom Panel Fabrication

We fabricate panels to the exact length of your roof on a dedicated rollformer — no horizontal seams ever. Eaves to ridge in one continuous piece.

02

Engineered Underlayment System

Synthetic underlayment plus high-temp ice & water shield in valleys, eaves, and around penetrations. Built to handle thermal cycling.

03

Concealed Clip Installation

Stainless steel clips fasten through the deck and lock into the seam. Allow thermal movement (panels expand and contract). No fastener stress.

04

Mechanical Seaming

Pneumatic seamer mechanically locks each seam into place — creating a single continuous waterproof surface from ridge to eave.

05

Architectural Trim Detailing

Custom-fabricated ridge caps, rake trim, and valley flashings to match panel color exactly. Every detail thought through.

FAQ

Questions, Answered

Standing seam in Northern Michigan typically runs $12-18 per square foot installed, vs. $4-6 for asphalt shingles. A 2,500 sq ft roof would be roughly $30,000-$45,000. Higher up-front, but you will likely never replace it.

Standing seam suits almost every home style — from rustic farmhouses to modern minimalist. The key is selecting the right rib profile and color. We bring physical samples to compare against your siding before you commit.

No. With proper underlayment and decking, a standing seam roof is no louder than an asphalt shingle roof. The 'tin roof' sound only happens in barns where panels are installed directly over open rafters.

Heavy gauge (24-gauge) standing seam is rated for Class 4 impact — the highest available. Small branches and typical hail won't dent it. We use 24-gauge as our standard, not the cheaper 26-gauge.

Properly installed standing seam roofs in our region routinely last 50-70+ years. The painted finish typically outlasts the substrate. We warranty our installation for 25 years and the manufacturer warranties run 30-50 years on paint and 50 on the substrate.

Ready to Start?

Get a Standing Seam Estimate.

See real metal samples in your own light. We bring the showroom to you.

(231) 884-7151

The Roof You Install Once.